Stopped buying disposable batteries years ago & never looked back. Have seen too many devices over time whose battery contacts were nuked due to leaking alkalines.
It used to be that NiMH's weren't good for long-standby, low power applications like TV remotes, digital clocks & the like. That hasn't been true since the introduction of low self-discharge ("precharged", "stay charged" etc) NiMH's a decade+ ago (pro tip: Eneloop Lite is perfect for such uses).
Some people claim that NiMH's lower output voltage is a problem. That's nonsense: practically any device designed to take AA/AAA will work down to ~1.1...1.0V, at which point NiMH is empty. At higher current draw, NiMH's tend to compare favourably against alkalines.
It does pay to invest in a good charger, and avoid no-name brands though. In order of personal preference: Eneloop, japanese-MADE like Sanyo/Panasonic or Fujitsu, then respected brands like Duracell. Don't bother with non-LSD cells, and cheapo brands aren't worth the risk of quality/performance issues.
Most people who don't opt for rechargeables, base their opinion on experience with NiMHs from 20y ago, crappy chargers, outdated info, or have money to burn & are simply lazy. Even that last point is questionable: I consider it easier to just pop a few cells in a charger & use, than head off to a store to buy disposables.
For consumer uses, alkaline has no place in modern society imho. Technology has advanced, rechargeables are cheap, good & easy now.
eternityforest 8 hours ago [-]
The important thing to note is that a "good charger" doesn't just mean from a trusted brand, it has to charge the batteries individually.
Otherwise, if it charges two in series, and you have a device that needs three, you'll probably eventually mismatch the charge levels.
If you ruin a battery it will be hard to find the bad one without a tester, and your charger won't help you if it can't measure individual cells...
I still prefer alkaline for anything that only needs replacing every 15 years though. I use NiMh in my mouse but alkaline in things I use once a year for a few minutes, like my pocket multimeter.
RetroTechie 8 hours ago [-]
> The important thing to note is that a "good charger" doesn't just mean from a trusted brand, it has to charge the batteries individually
Yep. Individual cell charging, using a proper delta-V method that detects when a cell is full, and per-cell indication of what's happening.
That way it's just "pop in some cells, wait, use" with 0 worries about state-of-charge before they go in (or mixing empty & half-empty ones. They all come out equally charged).
Chargers which do constant-current + timer cutoff are crap, that will overcharge & destroy your cells.
Eddy_Viscosity2 6 hours ago [-]
Do you have any recommendations on which chargers that do this?
wlesieutre 5 hours ago [-]
I have a La Crossse Alpha Power charger for mine but it looks like they've gotten out of that business
That can also charge lithium ion cells but only the small ones up to AA sized. If you get into some other hobby like flashlights with bigger cells, there are bulkier chargers on the market that will charge a NiMH AAA and also a lithium ion 21700.
lp92 46 minutes ago [-]
ISDT is pretty solid. I have one of their 4 cell USB C charger that supports AA/AAA NiMH charging. Under $20. Primarily use it to charge my remote batteries.
RetroTechie 4 hours ago [-]
lygte-info.dk is a treasure trove.
Mostly Li-ion (flashlight) focussed, but not all. And there's some good multi-chemistry chargers out there.
I have a Maha C9000 (NiMH only) which is very good but overkill feature-wise for most users. And an Enedepots A8 (multi-chemistry) which was good value for its money, but not high quality (eg. CE marking on its label is bullshit, and 1 slot stopped charging so it's now a 3-slot one).
Many good options out there.
4 hours ago [-]
hommelix 4 hours ago [-]
> I still prefer alkaline for anything that only needs replacing every 15 years though. I use NiMh in my mouse but alkaline in things I use once a year for a few minutes, like my pocket multimeter.
For stuff I use once a year or less, I keep a strip of plastic between one pole of the battery and the contact spring, to keep the circuit open and not discharge the battery.
swed420 5 hours ago [-]
> Have seen too many devices over time whose battery contacts were nuked due to leaking alkalines.
Obviously it's best to avoid this entirely for reasons you state. But for anybody too late, vinegar on a Q-tip works extremely well and has saved many devices for me.
kalleboo 6 hours ago [-]
I switched to Eneloop NiMHs about a decade ago when I got tired of something running out of battery and not having any replacements at home, adding it to a shopping list, forgetting it, etc.
Now I just keep a 1.1:1 NiMH batteries:device ratio. Whenever I buy something that takes AA/AAAs I buy another pack of batteries along with it.
First using the Amazon Basics rewraps until they switched to a Chinese manufacturer. Then switched to IKEA ones. Any NiMHs that are "Made in Japan" for the past decade are some form of Eneloops with a different label.
But from an economical standpoint it's a terrible deal. I would save a bundle of cash buying dollar store disposable batteries that will last a decade in the TV remote over a NiMH which will see what, 4 recharges over it's lifetime?
NetMageSCW 4 hours ago [-]
>I consider it easier to just pop a few cells in a charger & use, than head off to a store to buy disposables.
That’s a very false comparison. When my remote needs batteries, I pull a few from the battery case and put them in the remote. If I have to charge them before I can use the remote, their would be no point. And it isn’t convenient to keep the charger always plugged in using an outlet nor keeping track of shelf time and recharging to keep them topped up every six months. And I use plenty of Lion rechargeables.
hn_submit 7 hours ago [-]
I use cheapo NiMh all the time and they're basically "good enough" for most uses, including remotes. Yes, they need to recharge more often, but since I go months between charges I don't care.
Do invest in a good computer controlled charger with discharge ("refresh") function.
xaldir 5 hours ago [-]
>Some people claim that NiMH's lower output voltage is a problem. That's nonsense
That's not nonsense, just not your experience.
As someone else below I have some devices that just wont work on NiMHs like my eneloop and will with any alkaline (a radio synchronized wall clock for example) others like an indoor/outdoor thermometer will have their screen being barely readable after just a few weeks. For these devices, alkaline is just the only workable solution, I can agree that these devices maybe shouldn't work that way, but they do.
I use eneloop/japanese-made amazon equivalent for all other devices, but there are a few edge cases for alkalines.
RetroTechie 4 hours ago [-]
For low-current but can't do 1.1V/cell devices (crap design imho, but yes they're out there), consider disposable lithium batteries.
They are expensive, but don't leak like alkalines, have very long shelf life & higher voltage (fresh battery ~1.7V)
londons_explore 10 hours ago [-]
I disagree with this guy.
I have a pile of both zinc-carbon and alkaline batteries, and a whole host of devices round my house that take them (TV remote, CO alarm, fake PS5 controller, laser level, doorbell, weighing scales, Polaroid camera, flashlights, bike lights, heating system valves, thermometer).
All devices work with the alkalines. But some devices won't work at all with the zinc-carbon batteries, and others have a comedically short battery life (eg. My weighing scales start to weigh wrong after just a few days on a zinc battery).
Overall, it just isn't worth the hassle to save a few cents on a battery.
And I don't have trouble with either of them leaking.
xattt 10 hours ago [-]
Alec “paretomaxxes” his recent topics because it’s what apparently grabs eyeballs.
As a discerning consumer, you still have the agency to pick batteries that work for you. The main selling point is to give zinc-carbons a try if you have a low-power device you rarely use.
However, a lot of times you just grab what’s at hand (probably alkaline) as a trip to the dollar store for that specific battery type doesn’t make sense.
srgb_vs_cmyk 9 hours ago [-]
I see heaps of discounted Kodak zinc-carbon battery blister packs, and they are without any doubt, shortest lasting batteries I ever encountered. I consider even the TV remote a too demanding task for them.
adrian_b 9 hours ago [-]
"Zinc-carbon battery" is a very inappropriate name.
Batteries are correctly named by the substances that react chemically with each other, providing energy.
Both the "zinc-carbon" batteries and the alkaline batteries are correctly named "zinc-maganese batteries".
They do not differ in the chemical reactants, they differ only in the nature of the electrolyte through which the ionic current passes, which is saline for "zinc-carbon batteries" (i.e. based on a solution of ammonium chloride) and alkaline for the "alkaline batteries (i.e. based on a solution of caustic potash).
The carbon electrode in the "zinc-carbon batteries" is inert and it does not matter for the chemical reactions. It just must be an electric conductor that is not corroded by the electrolyte. Carbon is the cheapest suitable material, but you could replace it with expensive materials, e.g. with platinum, and the battery would function exactly in the same way.
Alkaline batteries have higher performance mainly because they have a lower internal electric resistance, because both the electrolyte has a higher conductivity and the carbon electrode is replaced by a steel electrode with higher conductivity, which is possible because it is not corroded by the alkaline electrolyte.
haddr 10 hours ago [-]
One argument that is wrong in the video: yes batteries are the same shape but some cheap brands basically put there less battery cells or basically less materials making those batteries less durable. I found out once by simply weighting such batteries against other more durable and the difference was ~ 30%. So it is still important to choose wisely even within the same class (e.g alkaline)
russdill 10 hours ago [-]
The video specifically discusses that one way you can usually tell that a battery is Zinc-Carbon vs Alkaline is because it's lighter and that batteries are often poorly/mislabled.
jblakey 5 hours ago [-]
I enjoy the content this guy produces - if you haven't looked through his videos, he's covered some interesting topics.
yread 9 hours ago [-]
Li-ion usbc rechargeable are a nice concept, but the price needs to come down a lot. Here they cost 20 eur for a 4 pack. That's the same as 20.000 mAh powerbank with PD.
eternityforest 9 hours ago [-]
Li ion will calendar age itself to unusability before alkaline runs out, in the kind of nanopower applications that disposable batteries are actually good for.
4gotunameagain 10 hours ago [-]
Clickbait, alkaline batteries are not obsolete.
Even if we accept his claim that all modern devices that take disposable AA/AAA batteries draw very little current, there are still so many old devices in use.
russdill 9 hours ago [-]
And for those devices, there are better choices (as discussed) than alkaline.
4gotunameagain 9 hours ago [-]
There are better choices if you assume I can recharge.
On a trip, you can buy alkaline batteries anywhere
russdill 2 hours ago [-]
If you can charge your phone, you can charge a battery. Either a lithium-ion type with a USB-C port or simple rechargables by bringing a charger.
4gotunameagain 2 hours ago [-]
So there is no conceivable situation where I have nowhere to charge my phone and I need some AAs for my non rechargeable camping lights ?
I must be living in some alternate reality, sorry, my bad. Will comply.
monegator 10 hours ago [-]
QRD?
ta8903 9 hours ago [-]
People don't use AA/AAA cells for high power appliances these days, so most people will be fine with replacing alkaline batteries with zinc-carbon ones, which are cheaper and potentially last longer/leak less.
eternityforest 9 hours ago [-]
Alkaline batteries are best used for things where the shelf life is the limiting factor.
Can zinc carbon sit for 20 years, running at a few milliamps for five minutes once a month, or for a few seconds s few times a day?
kalleboo 6 hours ago [-]
In the video he uses the 20-year-old zinc-carbon batteries that came with his DVD player remote and still work today as an example.
And mentioned the fact that carbon-zinc batteries are less likely to leak since they don't have the outgassing problem that alkalines do, which is another factor in longevity.
eternityforest 20 minutes ago [-]
I wonder what's actually happening there and how much capacity they have left. Where did the 3 to 5 year spec come from?
Is the voltage actually an accurate measure of remaining capacity after self discharge, as opposed to after actual use?
londons_explore 10 hours ago [-]
Not sure if it's the case in the USA, but here in the UK it seems to be that AAA and AA batteries cost exactly the same, and that offends me. Why should I pay the same for half the storage capacity? Is it price fixing?
Steve44 10 hours ago [-]
I'm going to speculate based on my experience with manufacturing & distribution.
The physical process to make a AA and a AAA is the same. The same machinery, using the same range of slightly difference size parts, and pretty much the same number of units per hour produced.
The storage & distribution will also be very similar so much of those costs will be the same. Yes the AAA is smaller and lighter so there will be some cost differences, but it's not like an AAA vs D.
Much of the final cost will be in the retail side of the business where the cost of processing a sale of AA and a sale of AAA is the same.
I do agree with you though, it's a little grating.
Skwid 10 hours ago [-]
I think more likely it's that the cost of materials is a pitiful fraction of the total cost. It takes just as many workers and machines to make a smaller battery, and they travel in the same lorry to the shop
londons_explore 5 hours ago [-]
Well zinc-carbon batteries are around a quarter of the price...
Or rather you get 16 for $3 rather than 4 for $3.
Suggesting materials cost is a good chunk of the price, unless perhaps alkaline involves some challenging manufacturing step?
selcuka 10 hours ago [-]
But you can fit more AAAs into the same lorry.
Also they don't cost the same in Australia, for example. I've also checked amazon.co.uk and they don't cost the same there either (£18.71 vs £11.20 for Amazon Basics 100-pack).
Rendered at 19:11:03 GMT+0000 (Coordinated Universal Time) with Vercel.
It used to be that NiMH's weren't good for long-standby, low power applications like TV remotes, digital clocks & the like. That hasn't been true since the introduction of low self-discharge ("precharged", "stay charged" etc) NiMH's a decade+ ago (pro tip: Eneloop Lite is perfect for such uses).
Some people claim that NiMH's lower output voltage is a problem. That's nonsense: practically any device designed to take AA/AAA will work down to ~1.1...1.0V, at which point NiMH is empty. At higher current draw, NiMH's tend to compare favourably against alkalines.
It does pay to invest in a good charger, and avoid no-name brands though. In order of personal preference: Eneloop, japanese-MADE like Sanyo/Panasonic or Fujitsu, then respected brands like Duracell. Don't bother with non-LSD cells, and cheapo brands aren't worth the risk of quality/performance issues.
Most people who don't opt for rechargeables, base their opinion on experience with NiMHs from 20y ago, crappy chargers, outdated info, or have money to burn & are simply lazy. Even that last point is questionable: I consider it easier to just pop a few cells in a charger & use, than head off to a store to buy disposables.
For consumer uses, alkaline has no place in modern society imho. Technology has advanced, rechargeables are cheap, good & easy now.
Otherwise, if it charges two in series, and you have a device that needs three, you'll probably eventually mismatch the charge levels.
If you ruin a battery it will be hard to find the bad one without a tester, and your charger won't help you if it can't measure individual cells...
I still prefer alkaline for anything that only needs replacing every 15 years though. I use NiMh in my mouse but alkaline in things I use once a year for a few minutes, like my pocket multimeter.
Yep. Individual cell charging, using a proper delta-V method that detects when a cell is full, and per-cell indication of what's happening.
That way it's just "pop in some cells, wait, use" with 0 worries about state-of-charge before they go in (or mixing empty & half-empty ones. They all come out equally charged).
Chargers which do constant-current + timer cutoff are crap, that will overcharge & destroy your cells.
On the smaller and cheaper side, something like this: https://isdt.shop/products/isdt-a4-air-4-bay-aaa-battery-cha...
Or bigger and fancier: https://isdtshop.com/products/isdt-n8
That can also charge lithium ion cells but only the small ones up to AA sized. If you get into some other hobby like flashlights with bigger cells, there are bulkier chargers on the market that will charge a NiMH AAA and also a lithium ion 21700.
Mostly Li-ion (flashlight) focussed, but not all. And there's some good multi-chemistry chargers out there.
I have a Maha C9000 (NiMH only) which is very good but overkill feature-wise for most users. And an Enedepots A8 (multi-chemistry) which was good value for its money, but not high quality (eg. CE marking on its label is bullshit, and 1 slot stopped charging so it's now a 3-slot one).
Many good options out there.
For stuff I use once a year or less, I keep a strip of plastic between one pole of the battery and the contact spring, to keep the circuit open and not discharge the battery.
Obviously it's best to avoid this entirely for reasons you state. But for anybody too late, vinegar on a Q-tip works extremely well and has saved many devices for me.
Now I just keep a 1.1:1 NiMH batteries:device ratio. Whenever I buy something that takes AA/AAAs I buy another pack of batteries along with it.
First using the Amazon Basics rewraps until they switched to a Chinese manufacturer. Then switched to IKEA ones. Any NiMHs that are "Made in Japan" for the past decade are some form of Eneloops with a different label.
But from an economical standpoint it's a terrible deal. I would save a bundle of cash buying dollar store disposable batteries that will last a decade in the TV remote over a NiMH which will see what, 4 recharges over it's lifetime?
That’s a very false comparison. When my remote needs batteries, I pull a few from the battery case and put them in the remote. If I have to charge them before I can use the remote, their would be no point. And it isn’t convenient to keep the charger always plugged in using an outlet nor keeping track of shelf time and recharging to keep them topped up every six months. And I use plenty of Lion rechargeables.
Do invest in a good computer controlled charger with discharge ("refresh") function.
That's not nonsense, just not your experience.
As someone else below I have some devices that just wont work on NiMHs like my eneloop and will with any alkaline (a radio synchronized wall clock for example) others like an indoor/outdoor thermometer will have their screen being barely readable after just a few weeks. For these devices, alkaline is just the only workable solution, I can agree that these devices maybe shouldn't work that way, but they do.
I use eneloop/japanese-made amazon equivalent for all other devices, but there are a few edge cases for alkalines.
They are expensive, but don't leak like alkalines, have very long shelf life & higher voltage (fresh battery ~1.7V)
I have a pile of both zinc-carbon and alkaline batteries, and a whole host of devices round my house that take them (TV remote, CO alarm, fake PS5 controller, laser level, doorbell, weighing scales, Polaroid camera, flashlights, bike lights, heating system valves, thermometer).
All devices work with the alkalines. But some devices won't work at all with the zinc-carbon batteries, and others have a comedically short battery life (eg. My weighing scales start to weigh wrong after just a few days on a zinc battery).
Overall, it just isn't worth the hassle to save a few cents on a battery.
And I don't have trouble with either of them leaking.
As a discerning consumer, you still have the agency to pick batteries that work for you. The main selling point is to give zinc-carbons a try if you have a low-power device you rarely use.
However, a lot of times you just grab what’s at hand (probably alkaline) as a trip to the dollar store for that specific battery type doesn’t make sense.
Batteries are correctly named by the substances that react chemically with each other, providing energy.
Both the "zinc-carbon" batteries and the alkaline batteries are correctly named "zinc-maganese batteries".
They do not differ in the chemical reactants, they differ only in the nature of the electrolyte through which the ionic current passes, which is saline for "zinc-carbon batteries" (i.e. based on a solution of ammonium chloride) and alkaline for the "alkaline batteries (i.e. based on a solution of caustic potash).
The carbon electrode in the "zinc-carbon batteries" is inert and it does not matter for the chemical reactions. It just must be an electric conductor that is not corroded by the electrolyte. Carbon is the cheapest suitable material, but you could replace it with expensive materials, e.g. with platinum, and the battery would function exactly in the same way.
Alkaline batteries have higher performance mainly because they have a lower internal electric resistance, because both the electrolyte has a higher conductivity and the carbon electrode is replaced by a steel electrode with higher conductivity, which is possible because it is not corroded by the alkaline electrolyte.
Even if we accept his claim that all modern devices that take disposable AA/AAA batteries draw very little current, there are still so many old devices in use.
On a trip, you can buy alkaline batteries anywhere
I must be living in some alternate reality, sorry, my bad. Will comply.
Can zinc carbon sit for 20 years, running at a few milliamps for five minutes once a month, or for a few seconds s few times a day?
And mentioned the fact that carbon-zinc batteries are less likely to leak since they don't have the outgassing problem that alkalines do, which is another factor in longevity.
Is the voltage actually an accurate measure of remaining capacity after self discharge, as opposed to after actual use?
The physical process to make a AA and a AAA is the same. The same machinery, using the same range of slightly difference size parts, and pretty much the same number of units per hour produced.
The storage & distribution will also be very similar so much of those costs will be the same. Yes the AAA is smaller and lighter so there will be some cost differences, but it's not like an AAA vs D.
Much of the final cost will be in the retail side of the business where the cost of processing a sale of AA and a sale of AAA is the same.
I do agree with you though, it's a little grating.
Or rather you get 16 for $3 rather than 4 for $3.
Suggesting materials cost is a good chunk of the price, unless perhaps alkaline involves some challenging manufacturing step?
Also they don't cost the same in Australia, for example. I've also checked amazon.co.uk and they don't cost the same there either (£18.71 vs £11.20 for Amazon Basics 100-pack).